Modern system of barrier-type support, developed by R&D department of KANT, Ltd., designed for working thin layers with capacity of 0.9 - 1.35 meters in difficult geological conditions, including heavy roofs and weak soils, compatible with all types of combines and scraper conveyors.
System is designed in accordance with international standards for underground coal mining, meets all European requirements and safety regulations, and provides the most efficient management of the roof and the soil.
Parameters | Size type 1 | Size type 2 |
Capacity of serviced coal layers, м | 0.9 - 1.35 | 1.1 - 1.6 |
Resistance of the system, kN | 4090 - 4620 | 4200 - 4750 |
Incremental resistance for 1 m2 of supported surface area, kN/м2 | 580 - 650 | 590 - 675 |
Coefficient of sliding apart, no less than | 1.8 | 1.8 |
Coefficient of initial delta, no less than | 0.7 | 0.7 |
Maximum effort of single hydraulic stand, kN | 2500 | 2500 |
Number of hydraulic stands | 2(along) | 2(along) |
Average incremental pressure on soil, MPa | 2.0 | 2.0 |
Maximum speak of the mounting, m/min | 4.0 | 4.0 |
Step of system fixation, m | 1.5 | 1.5 |
Step of system movement, m | 0.63; 0.7; 0.8 | |
Power during system movement, kN | 392 | 392 |
Effort to move converoy | 230 | 230 |
Height, mm | 670 - 1250 | 820 - 1480 |
Width | 1450 | 1450 |
Length, no more than | 5840(4200 without console) | 5840(4200 without console) |
Coefficient of roof tightening, no less than | 0.9 | 0.9 |
Maximum leaning angle of the formation striking (degrees) | ±35 | ±35 |
Maximum leaning angle of the formation up and down (degrees) | ±10 | ±10 |
Weight, kg | 9600 | 9700 |